High-power cylindrical vector beams generated from an all-fiber linearly polarized laser by metasurface extracavity conversion.

Five-hundred-watt cylindrical vector beams (CVBs) at 1030 nm with the 3 dB linewidth being less than 0.25 nm have been generated from a narrow linewidth all-fiber linearly polarized laser by metasurface extracavity conversion. At maximum output power, the transmission efficiency and polarization extinction ratio of radially polarized cylindrical vector beams (RP-CVBs) are beyond 98% and 95%, respectively. The average power is approximately an order higher than previously reported high-power narrow-linewidth CVBs generated from fiber lasers. The temperature rise of the metasurface is less than 10°C at 500 W output power, which means that the system can be further power-scaled in the near future. The high-power, high-purity, and high-efficiency RP-CVBs generated by the metasurface demonstrate potential application of a metasurface in high-power CVBs lasers.

SRS suppression in multi-kW fiber lasers with a multiplexed CTFBG.

In this paper, we present experimental studies on newly developed multiplexed chirped tilted fiber Bragg gratings (MCTFBGs) for stimulated Raman scattering (SRS) suppression for high-power fiber laser systems. The MCTFBG device is composed of five continuous segments of chirped tilted fiber Bragg gratings (CTFBGs), which are inscribed into the large-mode-area (LMA, 25/400µm) fibers. The SRS suppression capability of the MCTFBG device has been successfully demonstrated with a master oscillator power amplification (MOPA) fiber laser system at the output level of 3.4 KW. The experimental observation thus indicates the MCTFBG's excellent SRS suppression capability at a very high power level (∼15 dB under >3 kW) and high thermal handling capacity (∼1.48℃/kw). Our work thus provides a key development of essential fiber grating components that can effectively suppress the SRS suppression at a very high power level.

Experimental investigation of quasi-static mode degradation in a high power large mode area fiber amplifier.

In this work, quasi-static mode degradation in high power fiber amplifiers has been investigated experimentally. An increase of M2 from 1.3 to 2.6 with distortion of the beam profile is observed, which results in the signal spectra and backward light characterization departing from the traditional phenomena. The amplifier has been operated at the same input pump power of 705 W for nearly 2.2 hours to investigate the relationship between quasi-static mode degradation and photodarkening. The evolution of M2 factor/beam profile, mode correlation coefficient and output laser power at different working times indicate that the quasi-static mode degradation in the high power fiber amplifiers is dependent on photodarkening and evolves on the scale of tens of minutes. A visible green light has been injected to photobleach the gain fiber for 19 hours, which reveals that the quasi-static mode degradation has been suppressed simultaneously. To the best of our knowledge, this is the first detail report of photodarkening-induced quasi-static degradation in high power fiber amplifiers.

[Development of a High Power Green Laser Therapeutic Equipment for Hyperplasia of Prostate].

The basic theory of high power green laser equipment for prostate hyperplasia therapy and the components of the system developed are introduced. Considering the requirements of the clinical therapy, the working process of the high power green laser apparatus are designed and the laser with stable output at 120 W is achieved. The controlling hardware and application software are developed, and the safety step is designed. The high power green laser apparatus manufactured with characteristics of stable output, multifunctional and friendly interface provides a choices of prostate hyperplasia therapy for using nationalization instrument.